Your source for powder coated fasteners.
We powder coat your parts
FREE SHIPPING All Products (US ONLY)

M8-1.25 Nylock Nuts

$0.12

M6-1.0 Nylock Nut

SPECIAL NOTE:

This product MUST be ordered with another item as it is not included with the free shipping program.

It is for your convenience to add nuts and/or washers with your order.

18-8 Stainless steel

See below for additional information

Make color selection in menu.

870 in stock (can be backordered)

Need Help

Description

SPECIAL NOTE:

This product MUST be ordered with another item to qualify for free shipping program.

It is for your convenience to add nuts and/or washers with your order.

Priced each piece, add any quantity.

M8-1.25 Nylock Nuts (nylon lock)

18-8/A-2 Stainless steel (If you need something else, please contact us for special order.

 

18-8 / A-2 stainless steel has a slightly lower tensile strength than a standard grade 5 steel bolt. If you need hardened or an otherwise different type of fastener, please contact us for a quote or any other questions you may have.

Head Type Thread Diameter Thread Pitch Length Head Diameter Drive Tool Size Material
N/A 8mm 1.0   N/A 13mm  18-8 / A-2 Stainless
             
  Closest 1/8″ Conversion   Closest 1/8″ Conversion  Closest  Conversion    
  5/16”   1/4” N/A    

Additional information

Weight .5 oz
Dimensions 7 × 5 × .5 in
Color

, , , , , , , , , , , , , , , , , , , , ,

Our products all come with a 100% satisfaction guarantee…for life.
If the coating ever fails due to defects in material or workmanship we will replace it for free.

Installation
Powder coated fasteners should always be installed with hand tools. The repeated impact from power tools can cause damage to the coating. Use well fitting clean 6 point tools (where applicable) for best results. The coating will hold up to being torqued to spec by hand. Powder coat is tough but keep in mind..it is a coating, it can be damaged, tighten with care.
Tip: If installing very light colored fasteners, wrap tape around the tool to avoid tool marks on the powder coat.

Care
Powder coat requires no special care. Clean with a soapy cloth or soft brush. It’s resistant to most chemicals, oils, solvents etc. Cleaning is a snap.